They were invented decades ago.
They have fewer moving parts than wheelbois.
They require less maintenance.
There’s obviously some bottleneck in expanding maglev technology, but what is it?
They were invented decades ago.
They have fewer moving parts than wheelbois.
They require less maintenance.
There’s obviously some bottleneck in expanding maglev technology, but what is it?
Ultimately, their competition is regular trains, which are simpler, more tolerant to buying from multiple manufacturers, still significantly more efficient and faster than anything roadborne, able to switch over the course of seconds instead of minutes, able to interoperate with different tiers of intensity and speed, able to be built at grade, cheaper and having the better part of two hundred years of technological refinement behind it. Ultimately, maglev has specific, niche advantages that make it a hard sell for any system that already has regular rail.
What is grade-separate
They can’t cross any other tracks/roads. I.e. everything else must go above/below it.
On one side, it can mean this. And for lighter railway construction, such as trams, light rail and rural regional trains, this can be optional. Plus it makes yards and depots easier to build, just slap a few concrete plates for a few crossings and the staff will find their way around. This is not possible with some maglev technologies
On another, it can also mean that the infrastructure is built directly on the ground. Being able to do so is extremely useful, since you don’t need to build (as many) bridges or tunnels to have rail going somewhere. Again, for some maglev technologies, this is not an option.
A lot of these arguments apply to high speed train. In France a completely separate line was build between Paris and Marseille for the TGV To reach its peak speed without being delayed by lines that stop at every station.
The problem is investment and shitty companies holding these technologies IMO.
To compare our bullet points for maglev and high speed & conventional rail:
High speed rail has enough compatibilities with regular rail to make sense.
To append, some examples of high speed systems with multiple manufacturers.
🇪🇺🇬🇧: Eurostar has, for the Channel Tunnel, two types of train built by two manufacturers. The old type by Alstom, the new type by Siemens.
🇪🇸: Just AVE has three different builders. The S-101 by Alstom, the S-102 by Talgo and the S-103 by Siemens. The S-102 is also used by Avlo, while OuiGo used Euroduplex sets by Alstom, and Iryo uses ETR 1000 sets built by Hitachi Italy.
🇮🇹: The ETR 500 is built by a consortium of manufacturers, several of which have been absorbed by others. The ETR 1000 has been built by a chain of builders due to mergers n stuff. And the NTV units are built by Alstom.
🇯🇵: Pretty much every major manufacturer of rolling stock has built at least some Shinkansen units. You’ll find trains by Hitachi, Mitsubishi, Kawasaki and others all over the network.
🇨🇳: The first generations of CHSR trains were all imported designs, derived from others, both Shinkansen and European types. This allowed them to kickstart a domestic rolling stock industry for later generations of train.
🇨🇭: Once we lower our standards of speed a touch, SBB uses two types, one by Alstom built in Italy, one by Stadler built domestically. And trains from neighbouring networks ride into particular areas, each of which has their own builders.
Maybe the new Japanese maglev Chuo Shinkansen will help - they’ve already had Mitsubishi, Nippon Sharyo (JR) and Hitachi build test trains for them
deleted by creator