https://m.youtube.com/watch?v=u01AbiCn_Nw mental outlaw video:

hi everyone, i was planning on getting a new laptop cheaply for about 500ish but then i stumbled upon this near-totally modular laptop rhat starts out at above 1000 bucks. do you think the cheaper laptop in the long run is just a false economy and i should go for the framework or what? if you want to ask questions go ahead but im mainly concerned about the longterm financials (and how well it will keep up over time)

  • 𝘋𝘪𝘳𝘬@lemmy.ml
    link
    fedilink
    arrow-up
    32
    arrow-down
    4
    ·
    1 year ago

    i was planning on getting a new laptop cheaply for about 500ish

    You should plan for what you need, not for what you’re willing to pay. If you need a mobile workstation then this 16 inch laptop would be too large and heavy. If you aim for a desktop replacement, then a 13 inch laptop might be too small (docking stations exist, but still …).

    The Framework laptop is a nice idea, though. But to be honest: how often did you change the components of your laptops before? One usually changes the SSD and maybe the RAM or the battery or - if you’re really adventurous - the heatpipe and/or the fan. All of this is already possible with most common laptops. If you’re unsure, get a ThinkPad.

    • iturnedintoanewt@lemm.ee
      link
      fedilink
      arrow-up
      56
      arrow-down
      4
      ·
      1 year ago

      How often did you change the components of your laptop before?

      Well that’s the point, ain’t it? You didn’t because you couldn’t. Now this laptop gives you a new plethora of opportunities.

      • ngprc@feddit.de
        link
        fedilink
        arrow-up
        13
        ·
        1 year ago

        Thought the same thing. Over time I replaced everything in my laptop that I could and specifically chose a laptop that is easyish to open and get parts for.

        I would love for a better processor and graphics card but the mainboard and power supply does not allow for better hardware. So I will need to buy a different laptop some day. If it were as easy as ordering new parts and putting it in there without fear of incompatibility I would love that.

      • nutomic@lemmy.ml
        link
        fedilink
        arrow-up
        3
        arrow-down
        1
        ·
        1 year ago

        I’ve changed the screen of a thinkpad from 720p to 1080p. Was cheaper to buy that way, and it was really easy to do.

    • the_q@lemmy.world
      link
      fedilink
      arrow-up
      16
      ·
      1 year ago

      I think you’re missing the point of the framework. Let’s say 6 years from now you want to upgrade to a more powerful CPU. Normally that means buying a whole new laptop. With the framework though you just buy a new board and keep all the other components. This saves money and lowers ewaste.

      • Xhieron@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 year ago

        Is that realistic? Not a rhetorical question: I’m genuinely curious. I ask because the last time I tried to update a single (desktop) part, it was more cost-effective to replace the whole Pc and migrate the salvageable parts since the only thing I could have held onto would have been the ram, SSD, and PSU.

        I suppose with a laptop you have the monitor to also consider, and admittedly I know nothing about laptop boards, but it just seems like 6 years is replacement time anyway, at least for a daily use computer.

          • 𝘋𝘪𝘳𝘬@lemmy.ml
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            The last time I replaced my PC the hardware was ca 12 years old and barely working. It went to the recycling center except the harddisk.

        • Omega_Jimes@lemmy.ca
          link
          fedilink
          arrow-up
          5
          ·
          1 year ago

          Honestly, we don’t know. Average laptop screens haven’t had any major improvements since IPS, so I think the screens have longevity. RAM and processors are more focused on lower power nowadays. Framework has already shipped “drop-in” replacement boards, and their whole company is based around that idea.

          If I had the money and i could afford to wait, I’d be willing to take a bet on Framework. I think the frame of the laptop will hold up as well as any other, but it’s only been a few years so who actually knows.

          Laptops from 6 years ago hold up well enough, except the batteries and main boards, if I could have replaced my old main board with a more modern processor and gpu I never would have had to upgrade.

        • Sklrtle@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          edit-2
          1 year ago

          So far as your desktop, you can certainly upgrade your computer without it being more cost effective to do a whole new build. It really just depends on what you need. Mostly it comes down to the limitations of your motherboard.

          Every so often they change the CPU socket required for new CPUs. So if you need a new CPU and you already have the best the socket on your mobo can do, then yeah you’re maybe looking at a new build at that point anyway. But otherwise you can just get an upgraded CPU of that socket. Similarly, eventually your motherboard won’t be able to support the latest version of RAM and if you need that you’ll have to replace the motherboard. So on and so forth.

      • Kindness@lemmy.ml
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Great in theory.

        Keeping backwards compatible hardware is nearly impossible in reality. USB A 3.x is not the same hardware as USB A 2.X despite keeping form-factor backwards compatible.

        Practical exercise: Find a board capable of swapping DDR4 RAM with DDR5 or vice versa.

    • Skelectus@suppo.fi
      link
      fedilink
      arrow-up
      6
      ·
      edit-2
      1 year ago

      It goes a bit further than that. When the CPU is too old and slow you can just slap in a newer board without having to buy a full machine. Still can’t answer if it’s worth it for OP though.

    • NaN@lemmy.sdf.org
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      ThinkPads continue to be less and less user serviceable and Linux support more quirky (especially on their AMD line). It’s all I’ve used but I sold my recent gen to get an older one and will probably go with a different vendor in the future.

      • 𝘋𝘪𝘳𝘬@lemmy.ml
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Yep. When the devices get older, I usually upgrade RAM (or install an SSD on very old hardware). Sometimes I even install a new battery.

        And that’s the thing: I never ever had any issues doing this. Even the internal battery is just screwed in and connected with a removable plug.

        While the Framework laptops are conceptually great, I just don’t see the use case in my world. It’s also pretty much vendor lock-in with the modules.