That story explains why I dislike led lights

    • pelespirit@sh.itjust.works
      link
      fedilink
      arrow-up
      5
      arrow-down
      28
      ·
      1 year ago

      I don’t think you understand the basics of lighting fabrication from that statement and those color temperatures are misleading.

        • Matt@lemmy.blahaj.zone
          link
          fedilink
          English
          arrow-up
          10
          ·
          1 year ago

          Most LEDs are based on a “blue pump”, which means the chip produces a lot of intensity in the blue wavelength range. Color temperatures are produced by adding more phosphor to the chip surface. The phosphor only allows certain wavelengths of color through, and the more phosphor added means the LED will appear warmer in color. More phosphor means more expensive though, which is why lots of LEDs are produced in the 7 to 5k range. Even when adding more phosphor to the chip and having a warmer color temperature, there is still blue light being produced and that can impact your sensitivity. Companies such as BIOS Lighting produce chips that don’t use a blue pump. Long story short, it’s a really complicated field that is long overdue for multiple layers of government regulation.

        • pelespirit@sh.itjust.works
          link
          fedilink
          arrow-up
          11
          arrow-down
          3
          ·
          1 year ago

          There are a lot of good articles about it. Explained in a rudimentary way, it’s super hard to make good reds for LED and has been a problem since its inception. OLEDs use little organic red pixels and the blacks turn off all light instead of replicating a black. It’s super interesting. When I was in school, they brought a major LED inventor to show us what they had, it wasn’t good quality light at the time and for a long time afterwards. OLED was the first time I saw good reds. If you go to a costco, look at the difference between the reds on the same pic, can you tell there is a difference or does it all look sort of magenta? That’s how you can tell if it’s a good OLED or not. To be fair though, you can mess with the settings to make it look shitty which some stores do to sell more of a certain type of tv.

            • pelespirit@sh.itjust.works
              link
              fedilink
              arrow-up
              2
              arrow-down
              1
              ·
              1 year ago

              No light is emitted? Not sure how to clarify that for you. Instead of making a super dark blue, green, purple, etc., it turns out the light.

                • uid0gid0@lemmy.world
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  1 year ago

                  OLED pixels are self emissive, which means each pixel emits its own light. Normal LED screens need a backlight (usually coming in from the edges) so you get light bleeding into what should be black pixels. OLEDs just turn off the pixel entirely. Some new LED screens are starting to be fully backlit which eliminates the light bleed problem but they are not widespread yet.