Recently bought a new laptop that comes with an AMD Radeon gpu and installed OpenSuse Tumbleweed on it which I had installed on my previous laptop as well but never had issues with suspending and resuming. However, with the new laptop, I am unable to resume after suspending or closing the lid unless I force it to shut down by holding the power button which is a major inconvenience.
I’m also dual booting alongside Windows and have secure boot enabled and have the Linux and Windows partitions encrypted if that’s what’s causing it which I doubt since this is the same setup I had on my old laptop
Any suggestions or advice would be greatly appreciated.
Edit: I was able to figure out that it does not suspend at all when I close the lid or click the suspend button on Gnome. Only found this out because when going through YaST Services Manager and manually starting systemctl suspend, the laptop suspends just fine and wakes back up. So I’m starting to think it’s more of a systemd issue? Any inputs?
Edit: turns out it was an issue with the official opensuse built kernel not sitting well. Downloaded a community version from the opensuse repository and it works fine. Very odd
deleted by creator
I was able to figure out that it does not suspend at all when I close the lid or click the suspend button on Gnome. Only found this out because when going through YaST Services Manager and manually starting systemctl suspend, the laptop suspends just fine and wakes back up. So I’m starting to think it’s more of a systemd issue? Any inputs?
deleted by creator
These problems, 9/10 times is solved by using another kernel.
had the same issue on nobara and i always thought it was nvidia problems. for me the only solution was to use another distro :( sometimes ctrl + alt + F2 or F1 got me back to the login screen.
I have/had a similar issue, but for an old nvidia laptop. What happens if you get it to suspend and resume again? Mine would come back the second time.
I can’t even get it to resume again which is the problem lol
Yeah, but for mine, i could close the lid and it would suspend again, and then i could resume. Pressing the power button briefly also worked.
If it is powered on but blank screen, you can try terminating the user session from a terminal
https://linuxiac.com/how-to-terminate-user-session-in-linux/
Unfortunately does not work for me because the screen is black and the laptop is suspended and refuses to wake up
I don’t have any advice, but I just wanted to confirm I have the same issue sometimes with my laptop running fedora.
If you use a recent release of Fedora (last 2-3 years). Try disabling WiFi and/or Bluetooth before suspending. There is an issue with some hardware, especially adapters. It doesn’t happen everytime, and it’s hard to accurately reproduce. Also, the symptoms can vary from black screen to sudo being stuck.
I have a similar issue but for me the black screen comes at random times when I open, close or move my windows or mouse.
I found a temporary fix for it by checking out the archwiki amdgpu page
But it still occurs , especially when I wake up my computer after suspending it.
Are you using the dedicated GPU as your primary GPU or the integrated GPU? I’ve found using the dGPU as the primary can sometimes lead to suspend/resume issues.
Pretty sure it only has an integrated GPU
Can you check dmesg and/or journald? What model Laptop is it?
Where do I go to check those? Sorry in advance I’ve never been the most knowledgeable about Linux
Edit: here is the exact laptop https://www.bestbuy.com/site/lenovo-yoga-7-16-wuxga-2-in-1-touch-screen-laptop-amd-ryzen-5-7535u-8gb-memory-512gbssd-arctic-grey/6533956.p?skuId=6533956
sudo dmesg | lessand something withjournalctl(not sure because I don’t use that currently). There should be some other logs you can check in/var/logtoo,kern.logsounds useful (though that might just come from sysklogd).journalctl -b -1 should get you logs from the last boot
I was able to figure out that it does not suspend at all when I close the lid or click the suspend button on Gnome. Only found this out because when going through YaST Services Manager and manually starting systemctl suspend, the laptop suspends just fine and wakes back up. So I’m starting to think it’s more of a systemd issue? Any inputs?
I know it’s not super helpful, but I’ll add that this happens to me periodically on my EndeavourOS, Intel based desktop as well. Not even all of the time, just sometimes when it suspends. It seemed to get better when I changed my settings to hybrid sleep, but it just happened again yesterday, so I’m back to square one. Bookmarking to check for possible solutions later.
I have the same problem with shutdown occasionally too, using > sudo shutdown now solves the problem.
Interesting, I’ll look in to that
It’s a wild guess, but try to disable Bluetooth or WiFi before suspending.
It’s doesn’t happen with all hardware, but it is a knowing issue.
Did not do anything sadly
It is happening to me too on my surface tablet. Do you have TLP installed? Just out of curiosity
Yes I do. This is the same exact setup I had on my previous laptop and the previous one worked fine but this one does not. Would you advise I uninstall TLP?
According to this https://github.com/linux-surface/linux-surface/issues/1113 TLP is one of the culprits but I would rather the boot sequence and wake up from suspend process hang than uninstall TLP. Without it, intel boost keeps overheating my tablet and the battery becomes shit.
Just uninstalled it and it did not fix the issue sadly
Happens on my manjaro desktop too. Hope you find a solution.
I have seen this on HP laptop with WWAN device installed. Disabled device from Bios and problem went away.
I had a similar issue on a new out of the box HP Prodesk. Independently of the distro I was running it wouldn’t want to wake up from standby. Turned out to be an (firmware?) issue with the SSD. After replacing it everything worked fine.
