Another traveler of the wireways.

  • 16 Posts
  • 131 Comments
Joined 1 year ago
cake
Cake day: June 12th, 2023

help-circle
  • This is buried toward the bottom of the release notes so I’m bringing it up here:

    Added instance-level default sort type

    Any admins out there considering changing their instance sort settings or asking people on their instance if they’d like this changed, given that we can individually set sorting anyway? Taking into account the inclination of people to never adjust default settings (I remain deeply curious about this tendency, as an aside), I think it might be worth at least bringing up to one’s instance community.

    If they decide they want it to remain the same, all good, and even better, it raises some people’s awareness that they can change it themselves.



  • Little feedback on the UI from taking a peek at this.

    When I went into settings and adjusted post display style from card to anything else, it wasn’t clear to me that this wouldn’t apply to the new For You feed, which left me confused and less inclined to use it. I still gave it a try to make sure I wasn’t missing anything and to see how much the feed seemed to change with some light interaction, but I think you’d need to use it more than I did to see an effect.

    Problem being: display settings not applying to the For You feed means I’m not going to use it much with the default card view.

    Second part is that there was some comment display lag as I looked through posts, so if I looked at a post about cats with cat-related comments, those comments would linger and appear for a moment under a different post about possums. It’s just long enough to be noticeable, so thought it worth mentioning.


  • Huh. I had to take a quick glance at the timestamp of this article to make sure it wasn’t old, as this was the same issue that inspired a short-lived fork a few years ago.

    I get where this article’s coming from, as I got where the people trying to fork it under a different name were too, however for better or worse I think what matters even more to people is that the software works well and has a good UX. If I remember right, I think Glimpse intended to focus on improving the UX but it didn’t last long enough to do much in that regard.

    Better than my memory though, here’s an article that gives some insight into what went into the cessation of its development.





  • Given the absence of specific communities (or active ones so far), if people would like they could start these conversations over in [email protected].

    I recognize it’s not the same, particularly for getting to those deep dive points you mention with ATLA, but gotta start somewhere, right?

    Also I can easily give this go-ahead being one of the mods there. Up to now I’ve hesitated popping into threads like this and pointing people there because I’m not a fan of consolidation, but it’s become apparent some simple meeting area may help to get more niche communities spun off and going.


  • You might try different media if you haven’t already, as in, instead of pencil/pen and paper, maybe colored pencils or markers. Maybe even try getting some black paper and trying to draw with white color pencils instead.

    I’m sure you may have tried a variety of things over the years, so I’m just spitballing, but also if you’re trying to dive into the deep end with more complex drawings, you might revisit and really hone the fundamentals. Fundamentals being like getting clean lines by practicing drawing those over and over till you can get a nice, sharp line (which often isn’t a single pencil/brush stroke!).

    Once you have those down you may move on to the simple shapes, squares, triangles, circles, and try to recognize how those are put together for more complex forms. It’s a tough skill to get down, without a doubt (I’m not some proficient artist personally), but it’s just that: a skill that takes not only practice but learning methodologies. One of the toughest parts with drawing is that there’s so many methods to go about it to figure out which helps you improve.



  • At a glance this sounds even more intrusive than it’s been with Win10 (and maybe 11?), and sadly it’s no surprise as even without AI junk, I think the defaults with Win10 (and maybe 11) are to track your PC use to try to provide some “convenience” features, e.g. display of recently used programs/accessed files when you go to open a new desktop (Win key + Tab).

    If they would be more transparent about this and indicate whether and how much of that info, “anonymized/depersonalized” or not, is being taken by them, I think people would still be understandably annoyed but more understanding; at least with an easy opt out or better still, the default being that you must opt in for any of it.


  • In strict technical terms, yeah it’s okay, albeit with the shortcomings to be expected of a smaller development team. In terms of population and activity with this format, I think it may be at the top compared to alternatives as well.

    There’s still others and other software options though for this format that people could try, which honestly may even be technically better, but lacking population/activity means they’re in an odd spot.

    The first of these you’ll read about on here are likely Kbin/Mbin, possibly followed by PieFed or still-in-development Sublinks. Kbin/Mbin is definitely the runner-up in terms of federated Reddit-alternatives, as it was one of the few options available at the time people were leaving Reddit.

    PieFed and Sublinks have emerged more recently with different priorities and approaches compared to Lemmy, but with the same desire to offer a federated option for people to deploy.

    The last you may read about around here would be of stuff like Discuit, Lobste.rs, Raddle (and any other sites built with Postmill), Tildes, and the like, which are all most like Reddit in terms of their being stand-alone sites, unconnected to any others running the same underlying server software. However each of these, I think, may have lower population than the cumulative population of the Lemmy network of sites.


    All that said, cutting to your last question: ultimately it heavily depends on the instance/site you settle into.

    Lemmy isn’t a monolith, which is both its greatest strength and weakness compared to Reddit. You may be able to find a Lemmy instance/site that heavily blocks out politics and moderates lightly, but the irony of this is that it means it may have to be overly-policed to achieve that, and might appear less active in the process from heavy disconnection/defederation from any instances/sites that permit political posts/discussion.

    Right now though, much of Lemmy is heavily political, and it’s arguably because of lax moderation to keep political posts/discussions to relevant communities, which is itself probably in part because of lacking moderation tools to enable lighter touches to redirect posts/discussions.

    Nevertheless, it’s possibly the best option fitting the format available at the moment given the rest, but if Lemmy and federation doesn’t suit you you might check out Tildes or Discuit. Although be advised: Tildes remains invite only for now.

    Links to all options/alternatives mentioned:


    One last point, I swear, but if you do stick around and just want to chat about tv shows, movies, and music, I’d recommend visiting:

    [email protected]
    [email protected]
    [email protected]
    [email protected]

    Honestly I think any general/casual discussion community would welcome posts about those subjects as well, which there are a number of across Lemmy sites to check out.





  • At a glance, Misskey and associated forks may appear to be Twitter-clones, but dig a little more and you’ll find they’re a lot more, for better and worse.

    The interface is highly customizable, not just with some different colored themes nor a multi-column interface, but that you can stack page elements in columns and set up “antennae” or filters to surface posts including specified keywords and/or hashtags while excluding others via keywords/hashtags as well. There’s also what they call “channels” which I think are sort of like groups or dedicated topics apart from hashtags to post to and discuss whatever the channel topic is.

    Oh, and because it seems *key wants to have a little of everything, there’s Pages, which is basically longform blog posting, and some versions include simple games. There’s also options for some other widgets I’ve not mentioned here. It’s genuinely pretty wild compared to the other federated microblogging services with how much flexibility it has and all that it has packed in.

    I think the only other federated service I’ve found that’s comparable in flexibility may be Hubzilla, albeit I got the impression it’s less user friendly, but still, very customizable and a lot you could do with it.


  • That still doesn’t touch upon the negative to tethering users identity to instances.

    Sorry, I should have been clearer. What I was trying to point to was that despite the portability of identity, the fact that you may still be highly reliant on the Bluesky relay (or frankly, any large relay), tethers your identity to them as without the relays there’s kind of no point to having a personal server at all.

    Moreover, given the reference model provided via the Bluesky App, there’s a good chance you’ll run into similar arrangements on the AuthTransfer protocol where personal servers and appviews are joined together to essentially create instances (or entryway services I think they call them). One of the remaining distinctions from this entryway instance arrangement and ActivityPub then would be which relay or relays your entryway instance connects to.

    Lastly I understand what you mean about people bouncing off Mastodon, but at the same time you kinda lose me here. You clearly mention the Fediverse preceding Mastodon yet then conclude with people having a bad experience with Mastodon meaning the rest of the Fediverse isn’t for them…? We’re using another variation of the Fediverse and ActivityPub here, so we’re both aware there’s more to it than that, even in the microblogging space, so I’m kind of confused on this point.

    Nevertheless, I otherwise agree, it’s good that people have more alternatives to get away from the trashfire Twitter’s become (arguably even more of).


  • use[r] identities are not tethered to instances

    Tbh while this is technically true, given the current circumstances, identities essentially are tethered albeit in a roundabout way. What I mean by that is, there’s no real point to them* without some relay and appview to work with, and for now, that’s just Bluesky.

    That said, I agree that it would be better to go to them than to Twitter (if they’re not even considering stuff like Mastodon), but that’s a low hurdle to clear.

    *-A caveat, supposedly it could be possible for personal data servers to connect to each other directly instead of via relays, but I haven’t come across anyone having tried this yet.


  • Oh! Thanks for the notice! I swear I think the spoiler stuff may have changed at some point, but maybe I’ve been handling it wrong this whole time.

    I’ve also not really wanted to use horizontal rules because of it turning things into headings, but haven’t found a better way to put some spacing between the end of lists and the rest of a post’s text. I think I’ve corrected it properly now to be less jank.


  • Idea is that eventually others will be able to build atop their protocol and set up different “appviews” as they call them as well as relays and personal data servers. As I understand it, “appviews” may be viewed similar to what Lemmy and Mastodon are to ActivityPub, different ways to view data passed through ActivityPub.

    Right now I think Bluesky may be the only such “appview” for their protocol parsing data from their relay, but the idea is you could spin up your own personal data server and maybe also your own appview, or choose from whichever may eventually exist, and that would be like your own “instance” connecting you to others via the appview parsing relay data.

    So in other words, sort of yes to your first question, and it’s sort of because right now there’s only one AuthTransfer relay at the moment and that’s Bluesky, but the idea is that others could be spun up, allowing more independence from Bluesky as a company.