Wait, is that actually Garbage? That was the first thing that popped into my head when I saw the picture. That Bond music video she did was awesome. World is Not Enough.
She/They
Wait, is that actually Garbage? That was the first thing that popped into my head when I saw the picture. That Bond music video she did was awesome. World is Not Enough.
Hatsune Miku? May not be the same thing your kiddo is in to, but boy is my very gay nephew obsessed. It is entirely adorable. I even added “CV01” to the ssid of the WiFi because I am the cool aunt.
Sorry, didn’t make it home until today and not sure if you get notifications on edits. You will need a monitor and keyboard hooked up to your server as you will not have ssh access until the network config is “fixed”. I would do the below with the GPU removed, so you know 100% that your networking config is correct before mucking about further.
Add a /etc/systemd/network/99-default.link
with the below contents.
# SPDX-License-Identifier: MIT-0
#
# This config file is installed as part of systemd.
# It may be freely copied and edited (following the MIT No Attribution license).
#
# To make local modifications, one of the following methods may be used:
# 1. add a drop-in file that extends this file by creating the
# /etc/systemd/network/99-default.link.d/ directory and creating a
# new .conf file there.
# 2. copy this file into /etc/systemd/network or one of the other paths checked
# by systemd-udevd and edit it there.
# This file should not be edited in place, because it'll be overwritten on upgrades.
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
I forget if you have to reboot, but I am going to assume so. At this point, you can get the new name of your nic card and fix your network config.
ip link
should list all of your nic devices, both real and virtual. Here is how mine looks like for reference, with the MAC obfuscated:1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enxAABBCCDDEEFF: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
You will need to edit your /etc/network/interfaces
file so the correct card is used.
/etc/network/interfaces
, just in case you mess something up.sudo vim /etc/network/interfaces
(or whatever text editor makes you happy)
It will need to look something like below. I have to have DHCP turned on for mine, so your config likely uses static. Really all you need to do is change wherever it says enp yada yada to the enxAABBCCDDEEFF
you identified above. source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface enxAABBCCDDEEFF inet manual
auto vmbr0
iface vmbr0 inet dhcp
#iface vmbr0 inet static
#address 192.168.5.100/20
#gateway 192.168.0.1
bridge-ports enxAABBCCDDEEFF
bridge-stp off
bridge-fd 0
sudo systemctl restart networking.service
Hopefully at this point you have nework access again. Check the below, do some ping tests, and if it doesn’t work, double check that you edited the interfaces file correctly.
sudo systemctl status networking.service
will show you if anything went wrong and hopefully show that everything is working correctlyip -br addr show
should show that the interface is up now.lo UNKNOWN 127.0.0.1/8 ::1/128
enxAABBCCDDEEFF UP
vmbr0 UP 192.168.5.100/20
At this point, if all is well, I would reboot anyways, just to make sure. If you add any GPUs, sata drives, other PCI device, disable/enable wifi/bt in the BIOS, or anything else that changes the PCI numbering, you don’t have to worry about your NIC changing.
Fuckwit is my go to. Or “Too stupid to breathe.” Or bring out some Linus Torvalds, but honestly Trump doesn’t deserve to be graced by that mans insults, as awesome as they are from a “JFC dude, that is going way too far”, except Trump would actually deserve them unlike the poor kernel maintainers.
I am not at home, but what I did was change the 99-default.link file. I found this from the two pages below. https://wiki.debian.org/NetworkInterfaceNames#CUSTOM_SCHEMES_USING_.LINK_FILES https://wiki.debian.org/NetworkInterfaceNames
Basically, by doing this, your nic cards will be forcibly named using the mac address:
#/etc/systemd/network/99-default.link
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
Afterwards, you will need to reboot and then update your network config file to use the correct names. I don’t ever change the network config with the GUI in proxmox as it has wrecked it too many times. I will update this reply again later with some more information on what to do.
Hey, you ok? I am not ok today, but I definitely don’t want to fill my skull with bullets. Go wash your sheets/bedding. For whatever reason, clean sheets are the best.
I changed my settings to name nic cards by mac address instead of the enumeration as I got sick of the name changing when I would add/remove pci devices.
I know right? It sucks having a curved screen with a case as it pushes my thumb in the exact worst spot on the side of the screen. I accidentally do things all the time. I rest my thumb on the case edge to try and avoid it, but if I barely tilt, it touches the oversensitive touchscreen. First world problems.
Same. I had to uninstall due to the battery drain issues. Pixel 6 Pro. Battery life is not something I am willing to compromise on.
Thank you. I admit I don’t use Firefox right now due to issues I ran in to during my trial run earlier this year. Once the battery drain issues are fixed on the Android client I can at least switch back to it on my phone.
My company surprised me last week as we did an install and things didn’t work right in Firefox for the customer. My boss and the team are committed to fixing it and doing better on browser testing. There was not a moment of hesitation on this decision. We of course told them to use Edge, Safari, or Chrome in the meantime, but by no means are we throwing it on the bottom of the “fix” pile. Team is almost done and ready to send to QA. Super proud.
I lucked out. Success at last! Now I can continue to code furiously doing things I know how to do.
Been there. Done that. FML on searching for programming help some days. Versioning is a nightmare as the way you “used” to do things is no longer relevant and the rest of the results are some asshole saying it is a duplicate question that was answered 10 years ago…that is no longer fucking relevant!
Sorry. Yesterday sucked. I hope today is less frustration and more things working like they are supposed to.
I use this on all on my Pis. It just works. I like the text config file for headless installation and how you can even add scripts to run on install too.
Sames. They make sweet monitors.
Thank you. So many people excuse rape, victim blame, and don’t see it as a “bad crime.”
Like other posts, Factorio. You will lose sleep. Set timers…
Proton and Vulkan make most things easy-ish if you are using Steam. Note that there is a little properties button on the game page that you probably need to use to force it to use Proton so it will install. Proton DB is your friend. Lutris + Wine is pretty good too. Proton is just Wine with enhancements.
You may find Helldivers a lot of fun too, especially if you can play with friends. It is suitably ridiculous in the best way and is sort of human vs aliens/robots. All of the humans (us) play on co-op teams to bring Democracy to the universe. There is a game master from the company that makes it that is leading the war against us. Like I said, suitably ridiculous. Most of my friends are playing it nightly and it will be a big part of our LAN party this weekend.
I do a lot on my M1 air and I haven’t even considered I would have RAM issues with 16GB. Windows, I would be getting 64GB to not be miserable. I don’t run as much as you all the time, but having a container or two going, far too many browser tabs, PDFs, 3-4 intellij projects, discord, teams, and probably other things I am forgetting about is the norm. I even have AutoCAD open sometimes.
The biggest difference is Mx is arm based, which goes a long way into getting better performance and battery life. I really need to look up again how Apple manages memory, swap, and performance in general. I just checked Activity Monitor and even with most of the memory showing as used, I don’t even notice. If my laptop were to die tomorrow due to my clumsy fumbling, I am getting another Mac. My only wish is getting Vulkan support. That would be amazing. Not going to hold my breath on that though.
Now, 8GB is a crime and it is not something I would recommend for any laptop/desktop, no matter what it is running. Not saying it wouldn’t work ok on a Mac for someone who only uses it for web browsing, but it is utterly ridiculous that 8GB is even an option these days. This is a dumb hill for Apple to die on and 16 should be the absolute minimum.
I have a debloated W11 VM on my proxmox server that I have used only once and is only there for some unknown emergency. With a little fiddling, I got it to idle under 4GB. I don’t plan to run servers on my laptop and invested enough on a little server rack to give me things like file servers, VMs, more permanent containers, and somehow got talked into making a gaming VM that I use at LAN parties. The 3U case for the main server travels very well.
Personally, I would try and get some of your server stuff off your machine. You can even take a look at some docker swarm or similar k8 concepts to reduce your container load. RPis are another good choice for some lower load server operations. I have a little RPi swarm that is powered by PoE+, though I plan on trying k8 on them soon to get some experience. RPis are also small enough that you could throw one in your bag if you needed something portable and are fairly inexpensive. Just a thought and may not be possible with your server applications.
I usually look at their GitHub or what have you to see if there are packages or instructions there. I have been able to solve most issues this way. Otherwise I see how much of a bitch it will be to compile from source. Depending what it is, I also check to see if there is a docker image instead.
I attempted a maiden less run, and it made the game world a lot more enjoyable. Even on a normal playthrough I forget about Torrent half the time. I like running around exploring. I suck at fighting on a mount anyways. I rarely remembered to ride a horse in Breath of the Wild too.